UL 845
Motor Control Centers

DETAILS
Edition Number:5SCC Approved:--
Edition Date:2005-08-31DOD Approved: 1993-04-20
Price Code:CANSI Approved: 2011-07-15
Type:ulcsance

  • SCOPE

    1 Scope

    1.1 Products covered

    1.1.1 This standard applies to motor control centers to be used in accordance with the U.S. National Electrical Code, ANSI/NFPA 70, the Canadian Electrical Code, Part 1, CSA C22.1, and the Mexican Electrical Installations (Utility), NOM-001-SEDE.

    1.1.2 These requirements cover motor control centers for use on circuits having available short-circuit currents not more than 200 000 A rms symmetrical or 200 000 A dc.

    1.1.3 This standard applies to single- and three-phase 50 and 60 Hz and dc motor control centers rated not more than 600 V ac or 1 000 V dc.

    1.1.4 Requirements for fire pump controllers are as provided in Annex c, item 11.

    1.2 Products not covered

    These requirements do not cover switchboards or panelboards intended for the control of electric light and power circuits, nor do they cover an individual unit for this purpose. Such units, however, that consist of manually or automatically operated switches, branch-circuit or service-circuit circuit-breakers, overcurrent-protective devices, or the like may be used within a motor control center.

    1.3 Equipment

    1.3.1 A motor control center can contain, but is not limited to, any combination of equipment such as the following:

    a)    full-voltage reversing or non-reversing combination motor control units;

    b)    full-voltage multispeed combination motor control units;

    c)    reduced-voltage part-winding, wye-delta or auto-transformer combination motor control units;

    d)    solid-state industrial controllers, such as adjustable-speed drives, programmable controllers, protective relays, and the like;

    e)    lighting or distribution panelboards;

    f)    feeder-tap units;

    g)    incoming-line equipment, such as main lugs, fusible switch, isolation switch, or circuit-breaker;

    h)    control or lighting transformers;

    i)    special equipment assemblies;

    j)    combination contactor units.

    1.3.2 The foregoing equipment can contain, but is not limited to, such items as pushbuttons, selector switches, indicating lights, control transformers, control circuit fuses, and auxiliary devices incorporated as an integral part of the units.

    1.4 Units of measurement

    The first values given are SI (metric) units. Alternate measurements shown in parentheses are US customary units, which sometimes are not strict conversions.

  • TABLE OF CONTENTS
    Expand All

    • Cover
    • Transmittal
    • UL Harmonized Standard Title Page
    • Table of Contents
      • Motor Control Centers
        • 1 Scope
          • 1.1 Products covered
          • 1.2 Products not covered
          • 1.3 Equipment
          • 1.4 Units of measurement
        • 2 Normative references
        • 3 Definitions
        • 4 Application Information and Components
          • 4.2 Components
        • 5 Characteristics
          • 5.1 General
          • 5.2 Voltage ratings
          • 5.3 Current
          • 5.4 Short-circuit
        • 6 Markings and product information
          • 6.1 Identification
          • 6.2 Product information
          • 6.3 Marking
          • 6.4 Installation instructions
        • 7 Normal service and transport conditions
          • 7.1 General
          • 7.2 Normal service conditions
        • 8 Construction and performance requirements
          • 8.1 General assembly
          • 8.2 Construction requirements
          • 8.3 Performance requirements
        • 9 Motor control center tests
          • 9.1 General
          • 9.2 Calibration tests
          • 9.3 Temperature-rise tests
          • 9.4 Overvoltage and undervoltage test
          • 9.5 Dielectric voltage-withstand tests (after temperature-rise test or overvoltage/undervoltage test)
          • 9.6 Current-withstand test
          • 9.7 Dielectric voltage-withstand tests (after current-withstand test)
          • 9.8 Contactor overload test
          • 9.9 Dielectric voltage-withstand test (after contactor overload test)
          • 9.10 Short-circuit tests – bus structure
          • 9.11 Dielectric voltage-withstand test (after short-circuit test – bus structure)
          • 9.12 Short-circuit (standard-level) tests for motor control center units
          • 9.13 Dielectric voltage-withstand test (after standard-level unit short-circuit test)
          • 9.14 Trip-out test for circuit-breakers (after standard-level unit short-circuit test)
          • 9.15 Short-circuit (high-level) test for motor control center units
          • 9.16 Dielectric voltage-withstand test (after high-level short-circuit test – motor control center units)
          • 9.17 Trip-out test for circuit-breakers (after high-level unit short-circuit test)
          • 9.18 Strength of insulating base and support tests
          • 9.19 Comparative deflection test
          • 9.20 Autotransformer starter test
          • 9.21 Factory tests
        • 10 Application
        • 11
        • 12
    • Annex A (Normative) Short-circuit test circuit calibration
    • Annex B (informative) Languages
    • Annex C (Normative) References
    • Annex D (Informative) Standards for Components
    • Annex E (Normative) – For Canada OnlyGuidelines for certification of fire pump controllers
    • Annex F (Informative) Factory tests
    • Annex G (Normative) Requirements for service entrance
    • Annex H (Informative) Application information