UL 62275
Cable Management Systems - Cable Ties for Electrical Installations

DETAILS
Edition Number:2SCC Approved:--
Edition Date:2016-10-14DOD Approved: --
Price Code:CANSI Approved: 2016-10-12
Type:ulcsance

  • SCOPE

    1 Scope

    This International Standard specifies requirements for metallic, non-metallic and composite cable ties and their associated fixing devices used for the management and support of wiring systems in electrical installations.

    Cable ties and associated fixing devices may also be suitable for other applications and where so used, regard should be taken of any additional requirements.

    This standard does not contain requirements that evaluate any electrical insulation properties of the cable tie or mechanical protection of the cables provided by the cable tie.

    This standard does not consider the mechanical interface of a fixing device to a solid surface such as a wall or ceiling.

    1DV.1 Modify the first paragraph as follows:

    This Standard specifies requirements for metallic, non-metallic and composite cable ties and their associated fixing devices used for the management and support of wiring systems in electrical installations in accordance with the Canadian Electrical Code (CEC), Part I, CSA C22.1, in Canada, Standard for Electrical Installations, NOM-001-SEDE, in Mexico, and the National Electrical Code (NEC), NFPA 70, in the United States of America.

    1DV.2 Modify by deleting the last paragraph in Clause 1 and adding the following note:

    NOTE This standard considers the mechanical interface of a fixing device to a surface when the means for securing is provided with the fixing device (See 9.7.1dv, 9.7.2dv, and 9.7.3dv).

  • TABLE OF CONTENTS
    Expand All

    • Cover
    • Transmittal
    • UL Harmonized Standard Title Page
    • Table of Contents
    • Deviations
    • IEC Foreword
      • CABLE MANAGEMENT SYSTEMS – CABLE TIES FOR ELECTRICAL INSTALLATIONS
        • 1 Scope
        • 2 Normative references
        • 3 Terms and definitions
        • 4 General requirements
        • 5 General notes on tests
        • 6 Classification
          • 6.1 According to material
          • 6.2 According to loop tensile strength for cable ties and mechanical strength for fixing devices
          • 6.3 According to temperature
          • 6.4 According to contribution to fire for non-metallic and composite cable ties only
          • 6.5 According to environmental influences
        • 7 Marking and documentation
        • 8 Construction
        • 9 Mechanical properties
          • 9.1 Requirements
          • 9.2 Installation test
          • 9.3 Minimum installation temperature test for cable ties
          • 9.4 Minimum operating temperature test for cable ties
          • 9.5 Loop tensile strength test for cable ties classified according to
          • 9.6 Loop tensile strength test for cable ties classified according to
          • 9.7 Mechanical strength test for fixing devices
        • 10 Contribution to fire
        • 11 Environmental influences
          • 11.1 Resistance to ultraviolet light
          • 11.2 Resistance to corrosion
        • 12 Electromagnetic compatibility
        • 13DV Smoke and heat release test
    • ANNEX A (normative) Compliance checks to be carried out for cable ties and fixing devices complying with IEC 62275:2006
    • ANNEX DVB (Normative) Adhesives
    • ANNEX DVC (Normative) Smoke and heat release test
    • ANNEX DVD(Informative) Substitution of materials
    • ANNEX DVE (Informative) Polymeric material modifications
    • ANNEX DVF (Normative) Tests for polymer identification
    • ANNEX DVG(Informative) Index of requirements by type
    • ANNEX DVH(Informative) Classifications worksheet (Canada and the United States)
    • ANNEX DVI(Normative) Mexican Normative References
    • Bibliography