UL 60745-2-15
Hand-Held Motor-Operated Electric Tools - Safety - Part 2-15: Particular Requirements for Hedge Trimmers

DETAILS
Edition Number:1SCC Approved:--
Edition Date:2010-06-28DOD Approved: --
Price Code:EANSI Approved: 2018-06-22
Type:ulcsaiec

  • SCOPE

    1 Scope

    This clause of Part 1 is applicable, except as follows:

    1.1 Addition:

    This standard applies to hedge trimmers which are designed for use by one operator for trimming hedges and bushes, utilizing one or more linear reciprocating cutter blades.

    This standard is not applicable to hedge trimmers with a rotating blade.

    1.1DV Modification to add the following text after "hedge trimmers” in the first paragraph:

    , and extended-reach hedge trimmers with a maximum length of 3.5 meters

  • TABLE OF CONTENTS
    Expand All

    • Cover
    • Transmittal
    • UL Harmonized Standard Title Page
    • Table of Contents
    • Deviations
    • IEC Foreword
      • HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS – SAFETY – Part 2-15: Particular requirements for hedge trimmers
        • 1 Scope
        • 2 Normative references
        • 3 Terms and definitions
        • 4 General requirements
        • 5 General conditions for the tests
        • 6 Void
        • 7 Classification
        • 8 Marking and instructions
        • 9 Protection against access to live parts
        • 10 Starting
        • 11 Input and current
        • 12 Heating
        • 13 Leakage current
        • 14 Moisture resistance
        • 15 Electric strength
        • 16 Overload protection of transformers and associated circuits
        • 17 Endurance
        • 18 Abnormal operation
        • 19 Mechanical hazards
          • 19.101 Handles
          • 19.102 Hand protection
          • 19.103 Cutting device
          • 19.104 Blade stopping time
          • 19.105 Lower barrier
          • 19.106 Cutting device cover
        • 20 Mechanical strength
        • 21 Construction
        • 22 Internal wiring
        • 23 Components
        • 24 Supply connections and external flexible cords
        • 25 Terminals for external conductors
        • 26 Provision for earthing
        • 27 Screws and connections
        • 28 Creepage distances, clearances and distances through insulation
        • 29 Resistance to heat, fire and tracking
        • 30 Resistance to rusting
        • 31 Radiation, toxicity and similar hazards
    • Annexes
    • Annex K (normative) Battery tools and battery packs
    • Annex L (normative) Battery tools and battery packs provided with mains connection or non-isolated sources
    • Annex AA (normative) Symbols for safety recommendations and warnings
    • Bibliography