UL 60335-2-1000
Standard for Household and Similar Electrical Appliances: Particular Requirements for Electrically Powered Pool Lifts

DETAILS
Edition Number:1SCC Approved:--
Edition Date:2017-09-29DOD Approved: --
Price Code:AANSI Approved: 2017-09-29
Type:ulstd

  • SCOPE

    1 Scope

    This clause of Part 1 is replaced by the following.

    This Standard deals with the safety of electrically powered pool lifts intended for persons requiring assistance for safe entry into and out of a pool, their RATED VOLTAGE being not more than 150 V between supply phases or one phase and neutral or ground, and intended for installation in accordance with the US National Electrical Code, (NFPA 70) Article 680, Part VIII.

    NOTE 101: Examples of appliances that are within the scope of this standard are:

    – portable and stationary lifts of the chair type

    – stationary lifts of the single wheelchair platform type.

    As far as is practicable, this standard deals with the common hazards presented by these appliances. However, in general, it does not take into account

    a) the use of appliances by young children or infirm persons without supervision;

    b) playing with the appliance by young children.

    NOTE 102: Attention is drawn to the fact that:

    – Authorities Having Jurisdiction should be consulted on additional installation regulations and requirements for lifts with respect to accessibility, performance and the like.

    NOTE 103: This standard does not apply to:

    – platform type lifts intended for multiple wheelchairs

    – pool lifts for use in medical facilities

  • TABLE OF CONTENTS
    Expand All

    • Cover
    • Transmittal
    • Table of Contents
    • UL Foreword
    • UL Preface
      • Household and Similar Electrical Appliances: Particular Requirements for Electrically Powered Pool Lifts
        • 1 Scope
        • 2 Normative References
        • 3 Terms and definitions
        • 4 General requirement
        • 5 General conditions for the tests
        • 6 Classification
        • 7 Marking and instruction
        • 8 Protection Against Access to Live Parts
        • 9 Starting of Motor-Operated Appliances
        • 10 Power Input and Current
        • 11 Heating
        • 12 Void
        • 13 Leakage Current and Electric Strength at Operating Temperature
        • 14 Transient Overvoltages
        • 15 Moisture Resistance
        • 16 Leakage Current and Electric Strength
        • 17 Overload Protection of Transformers and Associated Circuits
        • 18 Endurance
        • 19 Abnormal Operation
        • 20 Stability and Mechanical Hazards
        • 21 Mechanical Strength
        • 22 Construction
        • 23 Internal Wiring
        • 24 Components
        • 25 Supply Connection and External Flexible Cords
        • 26 Terminals for External Conductors
        • 27 Provision for Earthing
        • 28 Screws and Connections
        • 29 Clearances, Creepage Distances and Solid Insulation
        • 30 Resistance to Heat and Fire
        • 31 Resistance to Rusting
        • 32 Radiation, Toxicity and Similar Hazards
    • Annexes
    • Annex B
    • Annex S
    • Annex AA (informative)
    • Bibliography