UL 2822
GREENGUARD Certification Program Method For Measuring And Evaluating Chemical Emissions From Cleaners And Cleaning Maintenance Systems Using Dynamic Environmental Chambers

DETAILS
Edition Number:1SCC Approved:--
Edition Date:2013-03-29DOD Approved: --
Price Code:AANSI Approved: --
Type:ule

  • SCOPE

    1 Scope

    1.1 Cleaning products and systems may emit a variety of volatile chemicals into the indoor air space of a building. The following methodology measures total volatile organic compounds (TVOC), individual volatile organic compounds (IVOCs), formaldehyde and other aldehydeslevels from cleaning products, materials, and complete cleaning systems associated with routine cleaning using test conditions defined to simulate product use in realistic commercial office, educational, healthcare and/or residential settings. The level of total or individual volatile organic chemical emissions is determined by observing the TVOC, IVOC, or aldehydeconcentrations in a dynamic environmental chamber under specified test conditions. The observed chamber concentration is converted by a mathematical calculation to an emission rate, a product specific variable, and then modeled to obtain room concentration estimates. The quantity of VOCs in the environmental chamber air is determined by gas chromatography/mass spectrometry. The methodology is generally applicable to volatile organic compounds with boiling points from 60°C to 290°C emitting from individual products. Emissions of selected aldehydes are measured using reverse-phase high-performance liquid chromatography (HPLC) with UV detection. Specialized analysis of chamber air samples may be conducted for other specific target chemicals as required for a specific product/project requirement.


    1.1 revised December 30, 2014

    1.2 This method may be used for certification solely by UL and its affiliated entities in the UL GREENGUARD certification program. Accordingly, only UL or its affiliated entities can determine and declare whether a product is in compliance with the requirements in this method. Any purported determination or declaration of testing, conformance, compliance or certification to this method by any other party is null and void and cannot be used to meet the requirements of this method.

    1.3 The methodology provides a standard means of reproducibly and accurately testing cleaning products and systems under a realistic, yet highly controlled, atmosphere.

    1.4 The methodology with standardized measurement and analyses provides consistent testing of products.

    1.5 This protocol applies to any cleaning product or system belonging to a product category generally used within an enclosed indoor environment. This includes, for example, general cleaners, glass cleaners, toilet cleaners, floor cleaners, hard surface cleaners, institutional cleaning systems, aerosol products and carpet cleaners used in public and commercial office buildings, schools, medical buildings, residences and other building types. The protocol applies to products that can be tested alone or as part of a system.

    1.6 This method establishes the procedures for product sample collection, emission testing and analysis, indoor air concentration modeling and associated documentation requirements.

    1.7 This method also establishes performance criteria for specific chemicals of interest.

    1.8 This method also establishes performance criteria for specific chemicals of interest.

    1.9 While this practice may list specific chemicals and associated maximum allowable concentrations, as required by criteria indoor air guidelines and specifications, it does not assess the human risk with use of the materials, which are promulgated OSHA requirements or equivalents, as an installer.

    1.10 This practice does not purport to address safety concerns, if any, associated with the use of this practice. It is the responsibility of the user of this protocol to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  • TABLE OF CONTENTS
    Expand All

    • Transmittal
    • Table of Contents
      • Body
        • GENERAL
          • 1 Scope
          • 2 Objectives and Use
            • 2.1 Objectives
            • 2.2 Use
          • 3 References and Documents
          • 4 Terminology – Acronyms and Abbreviations
          • 5 Definitions
          • 6 Symbols
        • PRODUCT SAMPLE COLLECTION, PACKAGING, SHIPMENT, AND DOCUMENTATION
          • 7 Purpose
          • 8 Personnel
          • 9 Representative Sample
          • 10 Sample Preservation
          • 11 Location of Sampling
          • 12 Sample Age
          • 13 Sample Collection Procedures
            • 13.1 Containerized and Wet Products
          • 14 Packaging and Shipment of Samples
          • 15 Chain of Custody Documentation
          • 16 Receipt of Samples by Laboratory
          • 17 Rejection of Samples by Laboratory
          • 18 Storage of Samples by Laboratory Prior To and Following Testing
            • 18.1 Before Testing
            • 18.2 After Testing
        • LABORATORY SAMPLE PREPARATION AND ANALYSES
          • 19 Test Specimen Preparation
          • 20 Preparation of Hard Surface Liquid Cleaner (includes General cleaners, Glass cleaners, Toilet cleaners, Floor cleaners, etc.) Test Specimens
          • 21 Preparation of Cleaning Systems
          • 22 Environmental Chamber Testing
            • 22.1 Facilities
            • 22.2 Equipment
            • 22.3 Chamber Sizes
          • 23 Environmental Chamber Performance Requirements
            • 23.1 Principle
            • 23.2 Test Conditions
            • 23.3 Duration
            • 23.4 Apparatus and Facilities
            • 23.5 Clean Air Supply and Flow Control
          • 24 Chamber and Materials
          • 25 Temperature and Humidity Control
          • 26 Monitoring and Data Acquisition
          • 27 Procedures
            • 27.1 Chamber Cleaning and Preparation
            • 27.2 Background Measurement
            • 27.3 Specimen Loading
            • 27.4 Chamber Air Leakage
            • 27.5 Replicate Tests
          • 28 Air Sampling
            • 28.1 Sampling Schedule
          • 29 Sampling Media
            • 29.1 General
            • 29.2 Flow Control
            • 29.3 Sampling Procedures
            • 29.4 Duplicate Samples
            • 29.5 Sample Storage
          • 30 Chemical Analyses
            • 30.1 Principle
            • 30.2 Analytical Instruments
            • 30.3 Methods for Individual VOCs
            • 30.4 TVOC Method
            • 30.5 Identification of Individual VOCs
            • 30.6 Analytical Calibrations
            • 30.7 Quantifiable Limit (QL)
          • 31 Calculations
            • 31.1 Emission Factor Calculations
            • 31.2 Exposure Modeling
            • 31.3 Determination of Predicted Exposure Concentrations
            • 31.4 Conversion to ppm
        • TARGET CHEMICALS AND MAXIMUM ALLOWABLE CONCENTRATIONS
          • 32 GREENGUARD Certification
          • 33 GREENGUARD Certified Gold
          • 34 Individual VOC ACGIH TLV and CA CREL Criteria Limits
        • REQUIRED ELEMENTS OF THE LABORATORY TEST REPORT
          • 35 The Report of the Test Results Should Contain the Following Sections
        • TABLES
    • SUPPLEMENT SA – UL GREENGUARD Certification Program Laboratory Qualifications and Proficiency Requirements