UL 219
Standard for Lined Fire Hose for Interior Standpipes

DETAILS
Edition Number:4SCC Approved:--
Edition Date:2013-10-25DOD Approved: --
Price Code:AANSI Approved: 2018-12-11
Type:ulstd

  • SCOPE

    1 Scope

    1.1 These requirements cover lined interior standpipe fire hose in the 1-1/2 and 2-1/2 inch sizes that is intended:

    a)    For fire-protection purposes only;

    b)    For use with inside standpipes installed in accordance with the Standard for the Installation of Standpipe and Hose Systems, NFPA 14;

    c)    For use on hose racks and reels and in cabinets where the specific combination of hose and rack, reel, or cabinet has been investigated and found acceptable;

    d)    To withstand infrequent service; and

    e)    To be periodically inspected and maintained while in service, as outlined in the Standard for the Care, Use, Inspection, Service Testing and Replacement of Fire Hose, Couplings, Nozzles and Fire Hose Appliances, NFPA 1962.

    1.2 The 1-1/2 inch size hose is intended for use primarily by the building occupants for the control of incipient fires until the arrival of the fire department.

    1.3 The 2-1/2 inch size hose is intended for use by fire departments and those trained in handling large water streams required during the more advance stages of fire on the inside of buildings or for exposure fire protection.

    1.4 These requirements do not cover couplings nor their method of attachment.

  • TABLE OF CONTENTS
    Expand All

    • Cover
    • Transmittal
    • Table of Contents
      • Body
        • INTRODUCTION
          • 1 Scope
          • 2 General
            • 2.1 Units of measurement
            • 2.2 Components
            • 2.3 Undated References
        • CONSTRUCTION
          • 3 Length
          • 4 Internal Diameter
          • 5 Reinforcement
          • 6 Lining
          • 7 Cover
        • PERFORMANCE
          • 8 Hydrostatic Proof-Pressure Tests
            • 8.1 General
            • 8.2 Apparatus
            • 8.3 Test method
          • 9 Kink Test
            • 9.1 General
            • 9.2 Apparatus
            • 9.3 Test method
          • 10 Hydrostatic Strength Test
            • 10.1 General
            • 10.2 Apparatus
            • 10.3 Test method
          • 11 Repeated-Bending Test
            • 11.1 General
            • 11.2 Apparatus
            • 11.3 Test method
          • 12 Wet Hose Test
            • 12.1 General
            • 12.2 Apparatus
            • 12.3 Test method
          • 13 Fold-Resistance Test
            • 13.1 General
            • 13.2 Apparatus
            • 13.3 Test method
          • 14 Abrasion Test
            • 14.1 General
            • 14.2 Apparatus
            • 14.3 Test method
          • 15 Heat-Resistance Test
            • 15.1 General
            • 15.2 Apparatus
            • 15.3 Test method
          • 16 Accelerated-Aging Test Of Threads
            • 16.1 General
            • 16.2 Apparatus
            • 16.3 Test method
          • 17 Adhesion Tests
            • 17.1 Lining
            • 17.2 Cover
            • 17.3 Apparatus
            • 17.4 Test method
          • 18 Tensile Strength And Elongation Test
            • 18.1 General
            • 18.2 Apparatus
            • 18.3 Test method
          • 19 Accelerated Air Oven Aging Test Of Linings Or Covers
            • 19.1 General
            • 19.2 Apparatus
            • 19.3 Test method
          • 20 Ozone Exposure Test
            • 20.1 General
            • 20.2 Apparatus
            • 20.3 Test method
          • 21 Water-Immersion Test Of Linings
            • 21.1 General
            • 21.2 Apparatus
            • 21.3 Test method
          • 22 Test For Free Sulfur In Latex Lining
            • 22.2 Apparatus and test method
        • MANUFACTURING AND PRODUCTION TESTS
          • 23 General
        • MARKING
          • 24 General