UL 2061
Standard for Adapters and Cylinder Connection Devices for Portable LP-Gas Cylinder Assemblies

DETAILS
Edition Number:3SCC Approved:--
Edition Date:2015-07-30DOD Approved: --
Price Code:AANSI Approved: 2015-07-30
Type:ulstd

  • SCOPE

    1 Scope

    1.1 These requirements cover quick-connect type and other hand-operated adapters and couplings intended to connect the cylinder valve on portable LP-Gas container assemblies to the inlet of the regulator on gas consuming equipment. These couplings are intended for vapor withdrawal service only.

    1.2 The adapters and couplings covered by these requirements are used in propane systems such as, but not limited to the applications covered by the following standards:

    a)     Storage and Handling of Liquefied Petroleum Gases, NFPA 58, except as noted in 1.3.

    b)     Outdoor Cooking Gas Appliances, ANSI Z21.58.

    c)     Outdoor Gas Grills, CGA 1.6.

    d)     Standard on Recreational Vehicles, NFPA 1192.

    1.3 These requirements do not cover quick closing couplings for LP-Gas that are used in industrial truck applications, and which are covered by the requirements in the Outline of Investigation for LP-Gas, Natural Gas, and Manufactured Gas Devices for Engine Fuel Systems, UL 1337.

  • TABLE OF CONTENTS
    Expand All

    • Cover
    • Transmittal
    • Table of Contents
      • Body
        • INTRODUCTION
          • 1 Scope
          • 2 General
            • 2.1 Components
            • 2.2 Units of measurement
            • 2.3 Undated references
          • 3 Service Pressure and Temperature
          • 4 Glossary
        • CONSTRUCTION
          • 5 General
          • 6 Materials
          • 7 Operation
        • PERFORMANCE
          • 8 General
          • 9 Deformation Test
          • 10 Operation Test
          • 11 Positive Seal and External Leakage Test
          • 12 Seat Leakage Test
          • 13 Abuse Test
          • 14 Load Test
          • 15 Endurance Test
          • 16 Bending Test
          • 17 Temperature Activated Shutoff Test
          • 18 Hydrostatic Pressure Strength Test
          • 19 Moist Ammonia Air Stress Cracking Test
          • 20 Accelerated Aging Test
          • 21 LP-Gas Compatibility Test
            • 21.1 General
            • 21.2 Weight loss
          • 22 Low Temperature Test
          • 23 Exposure To Ultraviolet Light
          • 24 Flow Limiting Test
            • 24.1 General
            • 24.2 Test procedure – part 1
            • 24.3 Test procedure – part 2
          • 25 Flow Limiting Device Endurance Test
          • 26 Fire Test
          • 27 Elevated Temperature Load Test
        • MANUFACTURING AND PRODUCTION TESTS
          • 28 General
        • MARKING
          • 29 General
    • Appendix A