UL 14B
Standard for Sliding Hardware for Standard, Horizontally Mounted Tin-Clad Fire Doors

DETAILS
Edition Number:9SCC Approved:--
Edition Date:2008-12-15DOD Approved: 1984-10-24
Price Code:BANSI Approved: 2017-07-17
Type:ulstd

  • SCOPE

    1 Scope

    1.1 These requirements apply to hardware for horizontally sliding fire doors which have demonstrated in fire tests fire-resistive properties warranting their use with two-ply and three-ply tin-clad fire doors tested in accordance with the Standard for Fire Tests of Door Assemblies, UL 10B ( NFPA No. 252).

    1.2 Requirements for the location and time rating are contained in codes, such as the International Building Code (IBC). The method of installation required for fire doors is not included in these codes. Requirements for the details for the installation of horizontally sliding two-ply and three-ply tin-clad fire doors are included in the Standard for Fire Doors and Other Opening Protectives, NFPA 80.

    1.3 The hardware included in these requirements is designed for mounting standard two-ply and three-ply tin-clad horizontally sliding fire doors for protection of openings not exceeding the dimensions for the hourly classifications indicated in Table 1.1 .

    1.4 These requirements do not cover automatic releasing or closing mechanisms.

    Table 1.1 - Limitations in types and dimensions

    Type of door

    Maximum area,

    Maximum width,

    Maximum height,

    Hourly rating

    ft2

    (m)2

    ft

    (m)

    ft

    (m)

    Three-ply

    120

    11.2

    12

    3.6

    12

    3.6

    3, 1-1/2, 1, 3/4

    Two-ply

    80

    7.4

    10

    3.1

    10

    3.1

    1-1/2, 1, 3/4

  • TABLE OF CONTENTS
    Expand All

    • Cover
    • Transmittal
    • Table of Contents
      • Body
        • INTRODUCTION
          • 1 Scope
          • 2 Units of Measurement
          • 3 Undated References
        • CONSTRUCTION
          • 4 General
          • 5 Flat Tracks
            • 5.1 General
            • 5.2 Holes for wall bolts
          • 6 Hangers
            • 6.1 Hangers for three-ply doors
            • 6.2 Track wall brackets
            • 6.3 Hangers for two-ply doors
          • 7 Front Binders
          • 8 Rear Binders and Rear-Binder Pockets
          • 9 Stay Rolls
          • 10 Chafing Strips
          • 11 Wedges
          • 12 Handles
          • 13 Bumpers and Bumper Shoes
          • 14 Washers
          • 15 Tolerances
          • 16 Installation Instructions
          • 17 Painting
        • MARKING
          • 18 General
    • APPENDIX A – SI (Metric) Equivalent for USA Units Shown in Figures and Wood Screw Sizes
    • APPENDIX B – Tolerances