UL 144
Standard for LP-Gas Regulators

DETAILS
Edition Number:8SCC Approved:--
Edition Date:2012-05-25DOD Approved: --
Price Code:BANSI Approved: 2014-11-05
Type:ulstd

  • SCOPE

    1 Scope

    1.1 These requirements cover pressure regulators for use with LP-Gas equipment.

    1.2 Regulators covered by these requirements are intended for use in non-refrigerated systems in accordance with the following standards:

    a)     Liquefied Petroleum Gas Code, (National Fire Codes, Vol. 2) NFPA 58;

    b)     National Fuel Gas Code (IAS/A.G.A. Z223.1), NFPA 54;

    c)     Outdoor Cooking Gas Appliances, IAS/A.G.A. Z21.58; and

    d)     Standard on Recreational Vehicles (RVIAA119.2) (National Fire Codes, Vol. 7), NFPA 501C.

    1.3 These requirements do not cover:

    a)    Compressed gas regulators;

    b)    Gas appliance pressure regulators;

    c)    Regulators for use in chemical, petroleum, or utility power plants; pipeline or marine terminals; or related storage facilities at such plants or terminals;

    d)    Combination gas control valves for gas appliances;

    e)    Regulators for use in oxygen-fuel, gas-welding, and cutting operations; and

    f)    Regulators for use in engine fuel (automotive and/or marine) applications.

    The requirements for (a) – (e) are covered in the Standard for Compressed Gas Regulators, UL 252, and in the Standard for Gas Appliance Pressure Regulators, IAS/A.G.A. Z21.18, and in the Standard for Combination Gas Controls for Gas Appliances, IAS/A.G.A. Z21.78, respectively.

    1.4 The assigning of flow ratings to regulators is not within the scope of these requirements, and observations of flow values are required to ascertain stability characteristics within the manufacturer's rated capacity. These requirements include tests to verify outlet pressure stability characteristics within the manufacturer's rated capacity. The manufacturer is to submit this data prior to the investigation of the device. See the Flow Test, 25.1.1 and 25.1.2, regarding the outlet pressure instability definition.


    1.4 revised April 11, 2014

  • TABLE OF CONTENTS
    Expand All

    • Cover
    • Transmittal
    • Table of Contents
      • Body
        • INTRODUCTION
          • 1 Scope
          • 2 General
            • 2.1 Units of measurement
            • 2.2 Components
            • 2.3 Undated references
            • 2.4 Terminology
          • 3 Glossary
          • 4 Service Pressure and Temperature Ratings
        • CONSTRUCTION
          • 5 Assembly
          • 6 Materials
          • 7 Bodies and Bonnets
          • 8 Bonnet Vent Openings
          • 9 Bonnet Caps
          • 10 Springs
          • 11 Diaphragms
          • 12 Linkage Mechanisms
          • 13 Hose Assemblies
          • 14 Pressure-Regulating Adjustments
          • 15 Regulator Overpressure Protection
        • PERFORMANCE
          • 16 General
          • 17 Deformation Test
          • 18 Regulating Adjustment Test
          • 19 Leakage and Strength of Mechanism Test
          • 20 Changeover Leakage Test
          • 21 Swivel Coupling Leakage Test
          • 22 Excess Pressure Test
          • 23 Strength of Body Test
          • 24 Lock-Up Test
          • 25 Flow Test
            • 25.1 General
            • 25.2 Test method
          • 26 Pressure Relief Test
          • 27 Type I Relief Flow Valve Capacity Test
          • 28 Type II Relief Valve Flow Capacity Test
          • 29 Overpressure Shutoff (OPSO) Feature Tests
            • 29.1 General
            • 29.2 Activation test
            • 29.3 Leakage and strength test
            • 29.4 OPSO feature endurance test
            • 29.5 Repeated tests
          • 30 Endurance Test
          • 30A Endurance Test – Manual Shutoff Valves
          • 31 Service-Reserve Indicator Endurance Test
          • 32 Service-Reserve Indicator Impact Test
          • 33 Freezing Rain Test
          • 34 Moist Ammonia-Air Stress Cracking Test
          • 35 LP-Gas Compatibility Tests
          • 36 Volume Change Test
          • 37 Weight-Loss Test
          • 38 Accelerated-Aging Test
          • 39 Low Temperature Test
        • MANUFACTURING AND PRODUCTION TESTS
          • 40 General
        • MARKING
          • 41 General