UL 1037
Standard for Antitheft Alarms and Devices

DETAILS
Edition Number:6SCC Approved:--
Edition Date:2016-09-09DOD Approved: --
Price Code:CANSI Approved: 2017-09-15
Type:ulstd

  • SCOPE

    1 Scope

    1.1 These requirements apply to the construction, performance, and operation of equipment intended to provide antitheft protection.

    1.2 An antitheft alarm is intended to give both audible and visible signals or only an audible signal if theft of protected property is attempted.

    1.3 An antitheft device is intended to protect property by significantly limiting the mobility or portability of the property.

    1.4 Equipment intended to provide a degree of fire resistance is additionally covered under the requirements of the Standard for Tests for Fire Resistance of Record Protection Equipment, UL 72.

  • TABLE OF CONTENTS
    Expand All

    • Cover
    • Transmittal
    • Table of Contents
      • Body
        • INTRODUCTION
          • 1 Scope
          • 2 General
            • 2.1 Components
            • 2.2 Units of measurement
            • 2.3 Undated references
            • 2.4 Terminology
          • 3 Glossary
          • 4 Installation and Operating Instructions
        • CONSTRUCTION – ALL PRODUCTS
          • ASSEMBLY
          • 5 General
            • 5.1 Product assembly
            • 5.2 Electrical protection
          • 6 Protection of Service Personnel
          • 7 Enclosures
            • 7.1 General
            • 7.2 Doors and covers
            • 7.3 Enclosure openings
            • 7.4 Screens and expanded metal
            • 7.5 Cast metal
            • 7.6 Sheet metal
            • 7.7 Product enclosure mounting
            • 7.8 Polymeric materials
          • 8 Electric Shock
          • 9 Corrosion Protection
          • FIELD WIRING CONNECTIONS
          • 10 General
          • 11 Cord Connected Products
          • 12 Permanently Connected Products
            • 12.1 General
            • 12.2 Field wiring terminals
            • 12.3 Field wiring leads
            • 12.4 Polarity identification
          • 13 Grounding
          • INTERNAL WIRING
          • 14 General
          • 15 Wiring Methods
          • 16 Separation of Circuits
          • 17 Bonding for Grounding
          • COMPONENTS, ELECTRICAL
          • 18 General
            • 18.1 Mounting of components
            • 18.2 Insulating materials
            • 18.3 Fuseholders
            • 18.4 Current-carrying parts
            • 18.5 Power on indicator
          • 19 Overcurrent Protection
          • 20 Semiconductors
          • 21 Switches
          • 22 Transformers and Coils
          • SPACINGS
          • 23 General
          • 24 Components
        • PERFORMANCE – ALL PRODUCTS
          • 25 General
            • 25.1 Test units and data
            • 25.2 Test samples and miscellaneous data
            • 25.3 Test voltages
          • 26 Normal Operation Test
          • 27 Input Test
          • 28 Output Measurement Test
          • 29 Power-Limited Circuits
            • 29.1 General
            • 29.2 Maximum voltage
            • 29.3 Maximum current
            • 29.4 VA (Not inherently limited circuits only)
          • 30 Electrical Supervision Test
          • 31 Undervoltage Operation Test
          • 32 Overvoltage Operation Test
          • 33 Variable Ambient Test
          • 34 Humidity Test
          • 35 Electric Shock Current Test
          • 36 Leakage Current Tests for Cord-Connected Products
          • 37 Overload Test
            • 37.1 General
            • 37.2 Separately energized circuits
          • 38 Endurance Test
            • 38.1 General
            • 38.2 Separately energized circuits
          • 39 Jarring Test
          • 40 Road Shock and Vibration Tests
          • 41 Dielectric Voltage-Withstand Test
          • 42 Temperature Test
          • 43 Abnormal Operation Test
          • 44 Electrical Transient Tests
            • 44.1 General
            • 44.2 Supply line transients
            • 44.3 Internally induced transients
            • 44.4 Input/output circuit transients
          • 45 AC Induction Test
          • 46 Polymeric Materials Test
          • 47 Battery Replacement Test
          • 48 Drop Test
          • 49 Strain Relief Test
            • 49.1 Supply cord
            • 49.2 Field-wiring leads
          • 50 Ignition Through Bottom-Panel Openings Tests
            • 50.1 General
            • 50.2 Hot, flaming oil
          • 51 Mechanical Strength Tests for Enclosures
          • 52 Special Terminal Assemblies Tests
            • 52.1 General
            • 52.2 Disconnection and reconnection
            • 52.3 Mechanical secureness
            • 52.4 Flexing test
            • 52.5 Millivolt drop test
            • 52.6 Temperature test
          • 53 Attack Test
          • 54 Residential Security Container
            • 54.1 Locks
            • 54.2 Attack test – Attack level I
            • 54.3 Attack test – Attack level II
            • 54.4 Attack test – Attack level III
        • MANUFACTURING AND PRODUCTION TESTS – ALL HIGH-VOLTAGE PRODUCTS
          • 55 General
          • 56 Production Line Dielectric Voltage-Withstand Test
          • 57 Production Line Grounding Continuity Test for High-Voltage, Cord-Connected Products
        • MARKINGS – ALL PRODUCTS
          • 58 Details
          • 59 Marking Permanency Tests
        • OUTDOOR USE EQUIPMENT
          • ASSEMBLY
          • 60 General
          • 61 Construction
            • 61.1 General
            • 61.2 Corrosion protection
          • 62 Field-Wiring Connections
          • 63 Internal Wiring
          • 64 Components, Electrical Insulating Material
          • PERFORMANCE
          • 65 Rain Test
          • 66 Dust Test
          • 67 Variable Ambient Test
          • 68 Metallic Coating Thickness Test
          • 69 Corrosion Tests
            • 69.1 General
            • 69.2 Salt spray (fog)
            • 69.3 Moist hydrogen sulfide (HS) – air mixture
            • 69.4 Moist carbon dioxide (CO)-sulfur dioxide (SO)-air mixture
          • 70 Ultraviolet Light and Water Exposure Test
          • 71 Accelerated Aging Tests For Gaskets, Sealing Compounds, and Adhesives
          • MARKINGS
          • 72 Details
        • ACCESSORY EQUIPMENT
          • 73 General
          • 74 Construction
          • 75 Performance (Installation) Test
          • 76 Markings
    • APPENDIX A