Browse & Buy UL Standards
Standard 710C, Edition 3

UL LLC Outline of Investigation for Ultraviolet Radiation Systems for Use in the Ventilation Control of Commercial Cooking Operations

UL Outline © 2017 UL LLC
710C, Edition 3 Edition Date: September 22, 2006 $225.00-$250.00
Summary of Topics o0710c_3_sum.html

Summary of Topics

This Third Issue of the Outline of Investigation for Ultraviolet Radiation Systems for Use in the Ventilation Control of Commercial Cooking Operations, Subject 710C, is issued to make the following important updates in requirements: a) Title (the Second Issue was titled "Outline of Investigation for Ultraviolet Lamps Used for Reduction of Grease Laden Vapors from Cooking Equipment") and Scope changed to better align with NFPA 96; b) Glossary is expanded for clarity; c) 7.2 allows other material than metal and to evaluate the suitability of the barrier by test; d) 7.3 allows filters and other UV attenuation barriers to be evaluated by test; e) 7.4 requires UV attenuation barriers also serving as filters to comply with UL 1046 or UL 710 as appropriate for the filter; f) 7.5 requires that attenuation barriers with adjustable features to be adjusted to the worst case position for test; g) 7.12 allows for cleaning of the interlock, h) 7.13 requires a pressure interlock to de-energize the UV lamp when the ports are plugged; i) 7.19 requires a ballast to comply with UL 935 or UL 1029; j) 7.21 and 17.8 require UV lamps to be marked; k) 7.22 requires the hood exhaust to be marked for lamp replacement; l) 8.1 added requirements for UV protection for electrical insulation; m) 9.1 changes the requirements for Water Wash Hoods to test with water wash nozzles; n) 10.1 adds requirements for protection of electrical components from condensation; o) 11.1 and 11.2 adds requirement for gaskets and seals to comply with UL 710 test; p) in Section 14, replace former UL 1598 water spray test with actual water wash hood nozzle tests; q) Section 16, clarifies a one-minute activation allowance for interlock systems; r) 17.1 adds adhesive label requirement to comply with UL 969; s) 17.2 adds that printed labels should not be exposed to the UV source; t) 17.5 revised to allow an equivalent statement; u) 17.6 adds required marking for filter attenuation barriers; v) 17.7 adds required markings for multi-piece filter attenuation barriers; w) 17.9 requires the hood to be marked for UV lamp replacement; x) 18.4 adds lamp replacement information to the instructions; y) 18.5 gasket replacement information added to the instructions; and z) 18.6 requires information on the water wash system maintenance and nozzles.

Revisions and Related Documents

Revisions
Red Line Std. (0)

Showing 10 of XX
Show All None available.

CSDS
Proposals (0)

Showing 10 of XX
Show All None available.

CRD/PAGs (0)

Showing 10 of XX
Show All None available.
Showing 10 of XX
Show All

Other Updates (0)

Showing 10 of XX
Show All None available.
Showing 10 of XX
Show All
Showing 10 of XX
Show All
Showing 10 of XX
Show All
Showing 10 of XX
Show All

Referenced Standards (58)

StandardEditionTitle
1 11 Standard for Flexible Metal Conduit
6 14 Standard for Electrical Rigid Metal Conduit - Steel
20 14 General-Use Snap Switches
33 8 Standard for Heat Responsive Links for Fire-Protection Service
44 19 Thermoset-Insulated Wires and Cables
50 13 Enclosures for Electrical Equipment, Non-Environmental Considerations
62 20 Flexible Cords and Cables
73 10 Standard for Motor-Operated Appliances
83 16 Standard for Thermoplastic-Insulated Wires and Cables
94 6 Tests for Flammability of Plastic Materials for Parts in Devices and Appliances
181 11 Standard for Factory-Made Air Ducts and Air Connectors
224 7 Extruded Insulating Tubing
248-7 2 Standard for Low-Voltage Fuses - Part 7: Class H Renewable Fuses
248-9 2 Standard for Low-Voltage Fuses - Part 9: Class K Fuses
248-11 3 Low-Voltage Fuses - Part 11: Plug Fuses
248-12 3 Low-Voltage Fuses - Part 12: Class R Fuses
248-14 2 Standard for Low-Voltage Fuses - Part 14: Supplemental Fuses
248-15 3 Low-Voltage Fuses - Part 15: Class T Fuses
248-16 3 Low-Voltage Fuses - Part 16: Test Limiters
310 9 Standard for Electrical Quick-Connect Terminals
429 7 Standard for Electrically Operated Valves
467 10 Grounding and Bonding Equipment
486A-486B 3 Standard for Wire Connectors
489 13 Molded-Case Circuit Breakers, Molded-Case Switches, and Circuit-Breaker Enclosures
496 14 Lampholders
498 16 Standard for Attachment Plugs and Receptacles
506 14 Standard for Specialty Transformers
510 10 ANSI/CAN/UL Standard for Polyvinyl Chloride, Polyethylene, and Rubber Insulating Tape
512 1 Standard for Halogenated Agent Hand and Wheeled Fire Extinguishers
514A 11 Metallic Outlet Boxes
514B 6 Standard for Conduit, Tubing, and Cable Fittings
514C 4 Standard for Nonmetallic Outlet Boxes, Flush-Device Boxes, and Covers
521 7 Standard for Heat Detectors for Fire Protective Signaling Systems
542 9 Standard for Fluorescent Lamp Starters
555 7 Standard for Fire Dampers
710 6 Standard for Exhaust Hoods for Commercial Cooking Equipment
710B 2 Standard for Recirculating Systems
723 11 Standard for Test for Surface Burning Characteristics of Building Materials
746A 6 Standard for Polymeric Materials - Short Term Property Evaluations
746B 5 Standard for Polymeric Materials - Long Term Property Evaluations
746C 7 Standard for Polymeric Materials - Use in Electrical Equipment Evaluations
746D 8 Standard for Polymeric Materials - Fabricated Parts
796 11 Standard for Printed-Wiring Boards
817 12 Standard for Cord Sets and Power-Supply Cords
864 10 Standard for Control Units and Accessories for Fire Alarm Systems
873 12 Standard for Temperature-Indicating and -Regulating Equipment
917 5 Standard for Clock-Operated Switches
935 10 Standard for Fluorescent-Lamp Ballasts
969 5 Standard for Marking and Labeling Systems
991 3 Standard for Tests for Safety-Related Controls Employing Solid-State Devices
1029 5 Standard for High-Intensity-Discharge Lamp Ballasts
1046 4 Standard for Grease Filters for Exhaust Ducts
1059 5 Standard for Terminal Blocks
1446 8 ANSI/CAN/UL Standard for Systems of Insulating Materials - General
1598 4 Luminaires
1998 3 Standard for Software in Programmable Components
2111 1 Standard for Overheating Protection for Motors
60691 4 Standard for Thermal-Links - Requirements and Application Guide
Showing 10 of XX
Show All

The cost to purchase this Standard varies depending on whether you are ordering a hardcopy, PDF or combination of the two. We also offer two different types of subscriptions: a one year and a three year.

You will be able to choose your purchase options on the following pages.

×
×
×
×
×

You have one or more subscriptions that will expire soon.

×

You have one or more licenses to assign

×