1 Scope

1.1 In the US, this standard covers the following:

1. a) Thermoplastic and rubber tapes for use as electrical insulation at not more than 600 V and at 80 °C (176 °F) and lower temperatures on joints and splices in wires and cables in accordance with NFPA 70. It is intended that rubber tape on a joint or splice be mechanically protected by a covering such as friction, PE (thermoplastic polyethylene), or PVC (polyvinyl chloride or a copolymer of vinyl chloride and vinyl acetate)tape. Thermoplastic tape is acceptable without the additional mechanical protection.

2. b) The characteristic constituent of the thermoplastic tape covered in this Standard is either PVC (polyvinyl chloride or a copolymer of vinyl chloride and vinyl acetate), or PE (thermoplastic polyethylene).

Summary of Topics

This revision of ANSI/CAN/UL 510 dated December 14, 2022 includes multiple revisions, clarifications and editorial corrections; 4.4, 4.8, 4.9, 5.15, 6.2, 8.1, 8.3, Table 8.1, 9.1, 10.1, 12.1, 12.2, 12.6, 12.7, 14.4, 14.5, 15.2, 16.1, 16.3, 20.3, Table 20.1, 20.9 and Annex B.