Browse & Buy UL Standards
Standard 1682, Edition 5

Plugs, Receptacles, and Cable Connectors of the Pin and Sleeve Type

UL Standard
Standard 1682, Edition 5 Edition Date: February 15, 2017 ANSI Approved: February 15, 2017 $505.00-$1,258.00

Revisions and Related Documents

Revisions
Red Line Std. (0)

Showing 10 of XX
Show All None available.

CSDS
Proposals (3)

CSDS Proposal   

CSDS Proposals

An electronic document associated with a UL Standard for Safety or Outline of Investigation, and issued by UL to propose:

  • A revision of a single or multiple requirement(s).
  • A complete new edition of an existing Standard or Outline.
  • A new Standard or Outline that has not previously been published.

CSDS Proposals provide access to view the proposal and submit comments within UL's Collaborative Standards Development System (CSDS) appropriately.

×

October 14, 2016
May 06, 2016
November 16, 2015
Showing 10 of XX
Show All

UL LLC CRD (0)

Showing 10 of XX
Show All None available.
Showing 10 of XX
Show All

Other Updates (0)

Showing 10 of XX
Show All None available.
Showing 10 of XX
Show All
Showing 10 of XX
Show All
Showing 10 of XX
Show All
Showing 10 of XX
Show All

Referenced Standards (40)

Below is a list of UL Standards referenced in UL 1682

StandardEditionTitle
20 14 General-Use Snap Switches
50 13 Enclosures for Electrical Equipment, Non-Environmental Considerations
62 20 Flexible Cords and Cables
94 6 Tests for Flammability of Plastic Materials for Parts in Devices and Appliances
98 14 Enclosed and Dead-Front Switches
157 2 Standard for Gaskets and Seals
224 7 Proposed Edition - UL 224 Ed. 7
310 9 Standard for Electrical Quick-Connect Terminals
467 10 Grounding and Bonding Equipment
486C 7 Splicing Wire Connectors
486E 5 Standard for Equipment Wiring Terminals for Use with Aluminum and/or Copper Conductors
489 13 Molded-Case Circuit Breakers, Molded-Case Switches, and Circuit-Breaker Enclosures
498 16 Attachment Plugs and Receptacles
508 18 Standard for Industrial Control Equipment
510 10 ANSI/CAN/UL Standard for Polyvinyl Chloride, Polyethylene, and Rubber Insulating Tape
512 1 Standard for Halogenated Agent Hand and Wheeled Fire Extinguishers
514A 11 Metallic Outlet Boxes
514B 6 Standard for Conduit, Tubing, and Cable Fittings
514C 4 Nonmetallic Outlet Boxes, Flush-Device Boxes, and Covers
746A 6 Standard for Polymeric Materials - Short Term Property Evaluations
746B 5 Standard for Polymeric Materials - Long Term Property Evaluations
746C 7 Standard for Polymeric Materials - Use in Electrical Equipment Evaluations
746D 8 Standard for Polymeric Materials - Fabricated Parts
817 12 Standard for Cord Sets and Power-Supply Cords
840 3 Standard for Insulation Coordination Including Clearances and Creepage Distances for Electrical Equipment
969 5 Standard for Marking and Labeling Systems
1059 5 Standard for Terminal Blocks
1581 4 Standard for Reference Standard for Electrical Wires, Cables, and Flexible Cords
1686 4 Standard for Pin and Sleeve Configurations
1977 3 Standard for Component Connectors for Use in Data, Signal, Control and Power Applications
248-1 3 Low-Voltage Fuses - Part 1: General Requirements
248-5 2 Standard for Low-Voltage Fuses - Part 5: Class G Fuses
248-6 2 Standard for Low-Voltage Fuses - Part 6: Class H Non-Renewable Fuses
248-7 2 Standard for Low-Voltage Fuses - Part 7: Class H Renewable Fuses
248-8 3 Low-Voltage Fuses - Part 8: Class J Fuses
248-9 2 Standard for Low-Voltage Fuses - Part 9: Class K Fuses
248-10 3 Low-Voltage Fuses - Part 10: Class L Fuses
248-12 3 Low-Voltage Fuses - Part 12: Class R Fuses
248-15 3 Low-Voltage Fuses - Part 15: Class T Fuses
486A-486B 3 Standard for Wire Connectors
Showing 10 of XX
Show All

Reverse Referenced Standards (30)

UL 1682 is referenced in the following list of UL Standards

StandardEditionTitle
111 6 Outline of Investigation for Multioutlet Assemblies
498 16 Attachment Plugs and Receptacles
498D 1 Attachment Plugs, Cord Connectors and Receptacles with Arcuate (Locking Type) Contacts
498E 1 Attachment Plugs, Cord Connectors and Receptacles - Enclosure Types for Environmental Protection
498F 1 Plugs, Socket-Outlets and Couplers with Arcuate (Locking Type) Contacts
508 18 Standard for Industrial Control Equipment
508A 3 Industrial Control Panels
913 8 Standard for Intrinsically Safe Apparatus and Associated Apparatus for Use in Class I, II, and III, Division 1, Hazardous (Classified) Locations
1573 4 Standard for Stage and Studio Luminaires and Connector Strips
1640 4 Standard for Portable Power-Distribution Equipment
1973 2 ANSI/CAN/UL Standard for Batteries for Use in Stationary, Vehicle Auxiliary Power and Light Electric Rail (LER) Applications
1977 3 Standard for Component Connectors for Use in Data, Signal, Control and Power Applications
2237 1 Standard for Multi-Point Interconnection Power Cable Assemblies for Industrial Machinery
2238 3 Cable Assemblies and Fittings for Industrial Control and Signal Distribution
2251 4 Standard for Plugs, Receptacles, and Couplers for Electric Vehicles
2305 1 Standard for Exhibition Display Units, Fabrication and Installation
2416 1 Audio/Video, Information and Communication Technology Equipment Cabinet, Enclosure and Rack Systems
2459 1 Insulated Multi-Pole Splicing Wire Connectors
2580 3 ANSI/CAN/UL/ULC Standard for Batteries for Use In Electric Vehicles
2695 2 Outline of Investigation for DC Rated Attachment Plugs and Outlet Devices Intended for Use with Information Technology and Telecommunication Equipment Installed in Restricted Access Locations
2735 1 Standard for Electric Utility Meters
60079-0 7 Standard for Explosive Atmospheres - Part 0: Equipment - General Requirements
60320-1 3 Standard for Appliance Couplers for Household and Similar General Purposes - Part 1: General Requirements
60745-1 4 Standard for Hand-Held Motor-Operated Electric Tools - Safety - Part 1: General Requirements
60947-1 5 Low-Voltage Switchgear and Controlgear - Part 1: General rules
60950-1 2 Information Technology Equipment - Safety - Part 1: General Requirements
60974-1 1 Standard for Arc Welding Equipment; Part 1: Welding Power Sources
62368-1 3 Standard for Audio/video, information and communication technology equipment - Part 1: Safety requirements
62841-1 1 Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery - Safety - Part1: General Requirements
61800-5-1 1 Standard for Adjustable Speed Electrical Power Drive Systems - Part 5-1: Safety Requirements - Electrical, Thermal and Energy
Showing 10 of XX
Show All

The cost to purchase this Standard varies depending on whether you are ordering a hardcopy, PDF or combination of the two. We also offer two different types of subscriptions: a one year and a three year.

You will be able to choose your purchase options on the following pages.

×
×
×
×
×

You have one or more subscriptions that will expire soon.

×

You have one or more licenses to assign

×