UL Standards Sales Site

Browse & Buy UL Standards
Standard 1090, Edition 7

Standard for Electric Snow Movers

UL Standard
Standard 1090, Edition 7 Edition Date: October 05, 2016 ANSI Approved: May 01, 2020 $716.00-$1,567.00

Revisions and Related Documents

Revisions
Red Line Std. (6)

Date      
May 12, 2020 Redline Revision
October 18, 2019 Redline Revision
September 20, 2017 Redline Revision
Showing 10 of XX
Show All

CSDS
Proposals (3)

CSDS Proposal   

CSDS Proposals

An electronic document associated with a UL Standard for Safety or Outline of Investigation, and issued by UL to propose:

  • A revision of a single or multiple requirement(s).
  • A complete new edition of an existing Standard or Outline.
  • A new Standard or Outline that has not previously been published.

CSDS Proposals provide access to view the proposal and submit comments within UL's Collaborative Standards Development System (CSDS) appropriately.

×

August 18, 2017
May 26, 2017
April 12, 2017
Showing 10 of XX
Show All

UL LLC CRD (0)

Showing 10 of XX
Show All None available.
Showing 10 of XX
Show All

Other Updates (0)

Showing 10 of XX
Show All None available.
Showing 10 of XX
Show All
Showing 10 of XX
Show All
Showing 10 of XX
Show All
Showing 10 of XX
Show All

Referenced Standards (85)

Below is a list of UL Standards referenced in UL 1090

StandardEditionTitle
20 14 General-Use Snap Switches
44 19 Thermoset-Insulated Wires and Cables
62 20 Flexible Cords and Cables
66 2 Fixture Wire
83 16 Standard for Thermoplastic-Insulated Wires and Cables
94 6 Tests for Flammability of Plastic Materials for Parts in Devices and Appliances
157 2 Standard for Gaskets and Seals
224 7 Extruded Insulating Tubing
244A 3 Standard for Solid-State Controls for Appliances
310 9 Standard for Electrical Quick-Connect Terminals
355 10 Cord Reels
429 7 Electrically Operated Valves
486C 7 Splicing Wire Connectors
486E 5 Standard for Equipment Wiring Terminals for Use with Aluminum and/or Copper Conductors
489 13 Molded-Case Circuit Breakers, Molded-Case Switches, and Circuit-Breaker Enclosures
489A 1 Standard for Circuit Breakers for Use in Communications Equipment
496 14 Lampholders
498 16 Attachment Plugs and Receptacles
507 10 Standard for Electric Fans
508 18 Industrial Control Equipment
510 10 ANSI/CAN/UL Standard for Polyvinyl Chloride, Polyethylene, and Rubber Insulating Tape
514A 11 Metallic Outlet Boxes
514C 4 Nonmetallic Outlet Boxes, Flush-Device Boxes, and Covers
514D 2 Standard for Cover Plates for Flush-Mounted Wiring Devices
635 3 Insulating Bushings
746A 6 Polymeric Materials - Short Term Property Evaluations
746B 5 Polymeric Materials - Long Term Property Evaluations
746C 7 Standard for Polymeric Materials - Use in Electrical Equipment Evaluations
746D 8 Polymeric Materials - Fabricated Parts
758 3 Appliance Wiring Material
773A 6 Standard for Nonindustrial Photoelectric Switches for Lighting Control
796 12 Printed Wiring Boards
810 6 Standard for Capacitors
817 12 Cord Sets and Power-Supply Cords
873 12 Standard for Temperature-Indicating and -Regulating Equipment
917 5 Standard for Clock-Operated Switches
935 10 Standard for Fluorescent-Lamp Ballasts
943 5 Ground-Fault Circuit-Interrupters
943B 3 Standard for Appliance Leakage-Current Interrupters
969 5 Standard for Marking and Labeling Systems
991 3 Standard for Tests for Safety-Related Controls Employing Solid-State Devices
1012 8 Power Units Other Than Class 2
1029 5 Standard for High-Intensity-Discharge Lamp Ballasts
1053 7 Ground-Fault Sensing and Relaying Equipment
1059 5 Terminal Blocks
1077 7 Standard for Supplementary Protectors for Use in Electrical Equipment
1097 6 Double Insulation Systems for Use in Electrical Equipment
1283 7 Electromagnetic Interference Filters
1310 7 Standard for Class 2 Power Units
1411 7 Standard for Transformers and Motor Transformers for Use in Audio-, Radio-, and Television-Type Appliances
1412 5 Standard for Fusing Resistors and Temperature-Limited Resistors for Radio- and Television- Type Appliances
1434 1 Thermistor-Type Devices
1441 5 Coated Electrical Sleeving
1446 8 Systems of Insulating Materials - General
1557 6 Standard for Electrically Isolated Semiconductor Devices
1565 5 Positioning Devices
1577 5 Standard for Optical Isolators
1642 6 Lithium Batteries
1699 3 Arc-Fault Circuit-Interrupters
1977 3 Component Connectors for Use in Data, Signal, Control and Power Applications
1998 3 Standard for Software in Programmable Components
2054 2 Standard for Household and Commercial Batteries
2111 1 Standard for Overheating Protection for Motors
2459 1 Insulated Multi-Pole Splicing Wire Connectors
248-1 3 Low-Voltage Fuses - Part 1: General Requirements
248-5 2 Standard for Low-Voltage Fuses - Part 5: Class G Fuses
8750 2 Light Emitting Diode (LED) Equipment for Use in Lighting Products
1004-1 2 Rotating Electrical Machines - General Requirements
1004-2 2 Standard for Impedance Protected Motors
1004-3 2 Standard for Thermally Protected Motors
1004-7 3 Standard for Electronically Protected Motors
4248-1 2 Fuseholders - Part 1: General Requirements
4248-9 1 Fuseholders - Part 9: Class K
5085-1 1 Low Voltage Transformers - Part 1: General Requirements
5085-2 1 Low Voltage Transformers - Part 2: General Purpose Transformers
5085-3 1 Low Voltage Transformers - Part 3: Class 2 and Class 3 Transformers
60691 4 Standard for Thermal-Links - Requirements and Application Guide
486A-486B 3 Wire Connectors
60730-1 5 Automatic Electrical Controls - Part 1: General Requirements
61058-1 5 Switches for Appliances - Part 1: General Requirements
60730-2-6 3 Standard for Automatic Electrical Controls - Part 2-6: Particular Requirements for Automatic Electrical Pressure Sensing Controls Including Mechanical Requirements
60730-2-7 3 Automatic Electrical Controls - Part 2-7: Particular Requirements for Timers and Time Switches
60730-2-8 3 Standard for Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Electrically Operated Water Valves, Including Mechanical Requirements
60730-2-9 4 Automatic Electrical Controls - Part 2-9: Particular Requirements for Temperature Sensing Controls
60730-2-18 1 Standard for Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Automatic Electrical Water and Air Flow Sensing Controls Including Mechanical Requirements
Showing 10 of XX
Show All

Reverse Referenced Standards (0)

Showing 10 of XX
Show AllNone available.

The cost to purchase this Standard varies depending on whether you are ordering a hardcopy, PDF or combination of the two. We also offer two different types of subscriptions: a one year and a three year.

You will be able to choose your purchase options on the following pages.

×
×
×
×
×

You have one or more subscriptions that will expire soon.

Go To Renewals
×

You have one or more licenses to assign

Go To Standards
×